前言

KubeSphere® 是经 CNCF 认证的 Kubernetes 主流开源发行版之一，在 Kubernetes 之上提供多种以容器为资源载体的业务功能模块，如多租户管理、集群运维、应用管理、DevOps、微服务治理等功能。

最近微服务，要部署到k8s，采用KubeSphere应用为中心的容器管理平台，于是捣鼓怎样去部署，第一次部署成功，好像不稳定，再次恢复四台服务器镜像，重新部署，其中遇到很多的问题及挫折，在此记录一下，以供大家参考。

准备服务器 
 
master：172.16.7.12 centos7.5 + 8cpu + 16G（内存） + 20G（/） + 200G ( data）node5：172.16.7.15 centos7.5 + 8cpu + 16G（内存） + 20G（/） + 1T ( data）node3：172.16.7.16 centos7.5 + 8cpu + 16G（内存） + 20G（/） + 1T ( data）node4：172.16.7.17 centos7.5 + 8cpu + 16G（内存） + 20G（/） + 1T ( data）
系统优化及安装准备软件

系统自动优化

参考“ansible安装部署CDH集群,与手动安装部署CDH集群，及CM配置和用户权限配置”，先进行对系统进行优化：

 
sh deploy_robot.sh init_sshsh deploy_robot.sh init_sys

关于deploy_robot.sh的脚本在https://github.com/fleapx/cdh-deploy-robot.git

ansible工具软件安装 

 
# 控制机器上安装ansibleyum install -y ansible

配置修改 /etc/ansible/hosts ，对需要管理的主机进行配置。

 
[all]172.16.7.12 master172.16.7.15 node5172.16.7.16 node3172.16.7.17 node4

默认配置，需要修改编辑 /etc/ansible/ansible.cfg。

 
# uncomment this to disable SSH key host checkinghost_key_checking = False

其他系统软件安装

 
ansible all -m shell -a "wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo"ansible all -m shell -a "sed -i 's/^.*aliyuncs*/#&/g' /etc/yum.repos.d/CentOS-Base.repo"ansible all -m shell -a "wget -O /etc/yum.repos.d/epel.repo https://mirrors.aliyun.com/repo/epel-7.repo"ansible all -m shell -a "yum -y install ebtables socat ipset conntrack nfs-utils rpcbind"ansible all -m shell -a "yum install -y vim wget yum-utils device-mapper-persistent-data lvm2"

集群时间校准

 
ansible all -m shell -a "yum install chrony -y"ansible all -m shell -a "systemctl start chronyd"ansible all -m shell -a "sed -i -e '/^server/s/^/#/' -e '1a server ntp.aliyun.com iburst' /etc/chrony.conf"ansible all -m shell -a "systemctl restart chronyd"ansible all -m shell -a "timedatectl set-timezone Asia/Shanghai"

系统其他优化

 
ansible all -m shell -a "echo '* soft nofile 655360' >> /etc/security/limits.conf"ansible all -m shell -a "echo '* hard nofile 655360' >> /etc/security/limits.conf"ansible all -m shell -a "echo '* soft nproc 655360' >> /etc/security/limits.conf"ansible all -m shell -a "echo '* hard nproc 655360' >> /etc/security/limits.conf"ansible all -m shell -a "echo '* soft memlock unlimited' >> /etc/security/limits.conf"ansible all -m shell -a "echo '* hard memlock unlimited' >> /etc/security/limits.conf"ansible all -m shell -a "echo 'DefaultLimitNOFILE=1024000' >> /etc/systemd/system.conf" ansible all -m shell -a "echo 'DefaultLimitNPROC=1024000' >> /etc/systemd/system.conf"

开放所有端口

 
ansible all -m shell -a "iptables -P INPUT ACCEPT"ansible all -m shell -a "iptables -P FORWARD ACCEPT"ansible all -m shell -a "iptables -P OUTPUT ACCEPT"ansible all -m shell -a "iptables -F"

安装docker

CentOS 7系统下docker安装，及配置阿里云加速，及所有配置请参加此文。

 
ansible all -m shell -a "yum remove docker docker-common docker-selinux docker-engine"ansible all -m shell -a "yum -y install docker-ce-19.03.8-3.el7"

安装k8s的镜像源

 
tee /etc/yum.repos.d/kubernetes.repo <<-'EOF'[kubernetes]name=Kubernetesbaseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64enabled=1gpgcheck=0repo_gpgcheck=0gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpghttps://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpgEOF
安装kubernetes-v1.18.6和kubesphere-v3.0

官方https://kubesphere.com.cn/多节点安装地址：https://kubesphere.com.cn/docs/quick-start/all-in-one-on-linux/

下载kk安装文件

 
# 在国内先添加一个环境变量export KKZONE=cncurl -sfL https://get-kk.kubesphere.io | VERSION=v1.0.1 sh -

 

然后，使kk成为全局可执行文件

mv ./kk /usr/local/bin

生成多节点集群的配置

 
# 创建一个配置文件模版kk create config --with-kubernetes v1.18.6 --with-kubesphere v3.0.0 -f ./config-kubesphere.yaml

修改配置文件

修改配置文件config-kubesphere.yaml

 
apiVersion: kubekey.kubesphere.io/v1alpha1kind: Clustermetadata:name: samplespec:hosts:- {name: master, address: 172.16.7.12, internalAddress: 172.16.7.12, user: root, password: azdebug_it}- {name: node3, address: 172.16.7.16, internalAddress: 172.16.7.16, user: root, password: azdebug_it}- {name: node4, address: 172.16.7.17, internalAddress: 172.16.7.17, user: root, password: azdebug_it}- {name: node5, address: 172.16.7.15, internalAddress: 172.16.7.15, user: root, password: azdebug_it}roleGroups:etcd:- node3master:- masterworker:- node4- node3- node5controlPlaneEndpoint:domain: lb.kubesphere.localaddress: "172.16.7.12"port: "6443"kubernetes:version: v1.18.6imageRepo: kubesphereclusterName: cluster.localnetwork:plugin: calicokubePodsCIDR: 10.233.64.0/18kubeServiceCIDR: 10.233.0.0/18registry:registryMirrors: []insecureRegistries: []#privateRegistry: dockerhub.kubekey.localaddons: []---apiVersion: installer.kubesphere.io/v1alpha1kind: ClusterConfigurationmetadata:name: ks-installernamespace: kubesphere-systemlabels:version: v3.0.0spec:local_registry: ""persistence:storageClass: ""authentication:jwtSecret: ""etcd:monitoring: trueendpointIps: 172.16.7.16port: 2379tlsEnable: truecommon:es:elasticsearchDataVolumeSize: 20GielasticsearchMasterVolumeSize: 4GielkPrefix: logstashlogMaxAge: 7mysqlVolumeSize: 20GiminioVolumeSize: 20GietcdVolumeSize: 20GiopenldapVolumeSize: 2GiredisVolumSize: 2Giconsole:enableMultiLogin: true # enable/disable multi loginport: 30880alerting:enabled: trueauditing:enabled: truedevops:enabled: truejenkinsMemoryLim: 5GijenkinsMemoryReq: 1500MijenkinsVolumeSize: 8GijenkinsJavaOpts_Xms: 1024mjenkinsJavaOpts_Xmx: 1024mjenkinsJavaOpts_MaxRAM: 2gevents:enabled: trueruler:enabled: truereplicas: 2logging:enabled: truelogsidecarReplicas: 2metrics_server:enabled: truemonitoring:prometheusMemoryRequest: 400MiprometheusVolumeSize: 20Gimulticluster:clusterRole: none # host | member | nonenetworkpolicy:enabled: truenotification:enabled: trueopenpitrix:enabled: trueservicemesh:enabled: true

执行及安装kubernetes v1.18.6和kubesphere v3.0.0

 
# 修改配置文件，添加上节点信息（节点名称，ip等）kk create cluster -f ./config-kubesphere.yaml

正确执行结果

 
[root@master ~]# sudo -E /bin/sh -c "/usr/local/bin/kubeadm init --config=/etc/kubernetes/kubeadm-config.yaml"W0105 22:45:15.009277 22248 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10]W0105 22:45:15.009521 22248 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io][init] Using Kubernetes version: v1.18.6[preflight] Running pre-flight checkserror execution phase preflight: [preflight] Some fatal errors occurred:[ERROR ExternalEtcdVersion]: couldn't load external etcd's certificate and key pair /etc/ssl/etcd/ssl/node-node3.pem, /etc/ssl/etcd/ssl/node-node3-key.pem: open /etc/ssl/etcd/ssl/node-node3.pem: no such file or directory[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3.pem doesn't exist[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3-key.pem doesn't exist[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`To see the stack trace of this error execute with --v=5 or higher[root@master ~]# cd /home/kk8s-script/ kubesphere-all-v3.0.0-offline-linux-amd64.tar.gz [root@master ~]# cd /home/kk8s-script/ kubesphere-all-v3.0.0-offline-linux-amd64.tar.gz [root@master ~]# cd /home/k8s-script/[root@master k8s-script]# export KKZONE=cn[root@master k8s-script]# ./kk create cluster -f ./k8s-config.yaml+--------+------+------+---------+----------+-------+-------+-----------+--------+------------+-------------+------------------+--------------+| name | sudo | curl | openssl | ebtables | socat | ipset | conntrack | docker | nfs client | ceph client | glusterfs client | time |+--------+------+------+---------+----------+-------+-------+-----------+--------+------------+-------------+------------------+--------------+| node5 | y | y | y | y | y | y | y | y | y | | | CST 22:55:35 || node4 | y | y | y | y | y | y | y | y | y | | | CST 22:55:35 || node3 | y | y | y | y | y | y | y | y | y | | | CST 22:55:35 || master | y | y | y | y | y | y | y | y | y | | | CST 22:55:35 |+--------+------+------+---------+----------+-------+-------+-----------+--------+------------+-------------+------------------+--------------+This is a simple check of your environment.Before installation, you should ensure that your machines meet all requirements specified athttps://github.com/kubesphere/kubekey#requirements-and-recommendationsContinue this installation? [yes/no]: yesINFO[22:57:10 CST] Downloading Installation Files INFO[22:57:10 CST] Downloading kubeadm ... INFO[22:57:10 CST] Downloading kubelet ... INFO[22:57:10 CST] Downloading kubectl ... INFO[22:57:11 CST] Downloading helm ... INFO[22:57:11 CST] Downloading kubecni ... INFO[22:57:11 CST] Configurating operating system ... [node5 172.16.7.15] MSG:vm.swappiness = 1net.ipv4.tcp_tw_reuse = 1net.ipv4.tcp_tw_recycle = 1net.ipv4.tcp_keepalive_time = 1200net.ipv4.ip_local_port_range = 10000 65000net.ipv4.tcp_max_syn_backlog = 8192net.ipv4.tcp_max_tw_buckets = 5000fs.file-max = 655350net.ipv4.route.gc_timeout = 100net.ipv4.tcp_syn_retries = 1net.ipv4.tcp_synack_retries = 1net.core.netdev_max_backlog = 16384net.ipv4.tcp_max_orphans = 16384net.ipv4.tcp_fin_timeout = 2net.core.somaxconn = 32768kernel.threads-max = 655360kernel.pid_max = 655360vm.max_map_count = 393210net.ipv4.ip_forward = 1net.bridge.bridge-nf-call-arptables = 1net.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1net.ipv4.ip_local_reserved_ports = 30000-32767[node4 172.16.7.17] MSG:vm.swappiness = 1net.ipv4.tcp_tw_reuse = 1net.ipv4.tcp_tw_recycle = 1net.ipv4.tcp_keepalive_time = 1200net.ipv4.ip_local_port_range = 10000 65000net.ipv4.tcp_max_syn_backlog = 8192net.ipv4.tcp_max_tw_buckets = 5000fs.file-max = 655350net.ipv4.route.gc_timeout = 100net.ipv4.tcp_syn_retries = 1net.ipv4.tcp_synack_retries = 1net.core.netdev_max_backlog = 16384net.ipv4.tcp_max_orphans = 16384net.ipv4.tcp_fin_timeout = 2net.core.somaxconn = 32768kernel.threads-max = 655360kernel.pid_max = 655360vm.max_map_count = 393210net.ipv4.ip_forward = 1net.bridge.bridge-nf-call-arptables = 1net.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1net.ipv4.ip_local_reserved_ports = 30000-32767[master 172.16.7.12] MSG:vm.swappiness = 1net.ipv4.tcp_tw_reuse = 1net.ipv4.tcp_tw_recycle = 1net.ipv4.tcp_keepalive_time = 1200net.ipv4.ip_local_port_range = 10000 65000net.ipv4.tcp_max_syn_backlog = 8192net.ipv4.tcp_max_tw_buckets = 5000fs.file-max = 655350net.ipv4.route.gc_timeout = 100net.ipv4.tcp_syn_retries = 1net.ipv4.tcp_synack_retries = 1net.core.netdev_max_backlog = 16384net.ipv4.tcp_max_orphans = 16384net.ipv4.tcp_fin_timeout = 2net.core.somaxconn = 32768kernel.threads-max = 655360kernel.pid_max = 655360vm.max_map_count = 393210net.ipv4.ip_forward = 1net.bridge.bridge-nf-call-arptables = 1net.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1net.ipv4.ip_local_reserved_ports = 30000-32767[node3 172.16.7.16] MSG:vm.swappiness = 1net.ipv4.tcp_tw_reuse = 1net.ipv4.tcp_tw_recycle = 1net.ipv4.tcp_keepalive_time = 1200net.ipv4.ip_local_port_range = 10000 65000net.ipv4.tcp_max_syn_backlog = 8192net.ipv4.tcp_max_tw_buckets = 5000fs.file-max = 655350net.ipv4.route.gc_timeout = 100net.ipv4.tcp_syn_retries = 1net.ipv4.tcp_synack_retries = 1net.core.netdev_max_backlog = 16384net.ipv4.tcp_max_orphans = 16384net.ipv4.tcp_fin_timeout = 2net.core.somaxconn = 32768kernel.threads-max = 655360kernel.pid_max = 655360vm.max_map_count = 393210net.ipv4.ip_forward = 1net.bridge.bridge-nf-call-arptables = 1net.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1net.ipv4.ip_local_reserved_ports = 30000-32767INFO[22:57:25 CST] Installing docker ... INFO[22:57:35 CST] Start to download images on all nodes [node5] Downloading image: kubesphere/pause:3.2[master] Downloading image: kubesphere/pause:3.2[node3] Downloading image: kubesphere/etcd:v3.3.12[node4] Downloading image: kubesphere/pause:3.2[node5] Downloading image: kubesphere/kube-proxy:v1.18.6[node4] Downloading image: kubesphere/kube-proxy:v1.18.6[node3] Downloading image: kubesphere/pause:3.2[master] Downloading image: kubesphere/kube-apiserver:v1.18.6[node5] Downloading image: coredns/coredns:1.6.9[node4] Downloading image: coredns/coredns:1.6.9[master] Downloading image: kubesphere/kube-controller-manager:v1.18.6[node5] Downloading image: kubesphere/k8s-dns-node-cache:1.15.12[node3] Downloading image: kubesphere/kube-proxy:v1.18.6[master] Downloading image: kubesphere/kube-scheduler:v1.18.6[node5] Downloading image: calico/kube-controllers:v3.15.1[node3] Downloading image: coredns/coredns:1.6.9[node4] Downloading image: kubesphere/k8s-dns-node-cache:1.15.12[node3] Downloading image: kubesphere/k8s-dns-node-cache:1.15.12[master] Downloading image: kubesphere/kube-proxy:v1.18.6[node5] Downloading image: calico/cni:v3.15.1[node4] Downloading image: calico/kube-controllers:v3.15.1[master] Downloading image: coredns/coredns:1.6.9[node5] Downloading image: calico/node:v3.15.1[node4] Downloading image: calico/cni:v3.15.1[node3] Downloading image: calico/kube-controllers:v3.15.1[node3] Downloading image: calico/cni:v3.15.1[master] Downloading image: kubesphere/k8s-dns-node-cache:1.15.12[node5] Downloading image: calico/pod2daemon-flexvol:v3.15.1[node4] Downloading image: calico/node:v3.15.1[master] Downloading image: calico/kube-controllers:v3.15.1[node3] Downloading image: calico/node:v3.15.1[node4] Downloading image: calico/pod2daemon-flexvol:v3.15.1[node3] Downloading image: calico/pod2daemon-flexvol:v3.15.1[master] Downloading image: calico/cni:v3.15.1[master] Downloading image: calico/node:v3.15.1[master] Downloading image: calico/pod2daemon-flexvol:v3.15.1INFO[23:01:26 CST] Generating etcd certs INFO[23:01:32 CST] Synchronizing etcd certs INFO[23:01:36 CST] Creating etcd service INFO[23:01:49 CST] Starting etcd cluster [node3 172.16.7.16] MSG:Configuration file already existsWaiting for etcd to startINFO[23:01:58 CST] Refreshing etcd configuration INFO[23:01:59 CST] Backup etcd data regularly INFO[23:02:00 CST] Get cluster status [master 172.16.7.12] MSG:Cluster will be created.INFO[23:02:01 CST] Installing kube binaries Push /home/k8s-script/kubekey/v1.18.6/amd64/kubeadm to 172.16.7.16:/tmp/kubekey/kubeadm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubeadm to 172.16.7.15:/tmp/kubekey/kubeadm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubeadm to 172.16.7.17:/tmp/kubekey/kubeadm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubeadm to 172.16.7.12:/tmp/kubekey/kubeadm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubelet to 172.16.7.16:/tmp/kubekey/kubelet DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubelet to 172.16.7.12:/tmp/kubekey/kubelet DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubelet to 172.16.7.15:/tmp/kubekey/kubelet DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubelet to 172.16.7.17:/tmp/kubekey/kubelet DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubectl to 172.16.7.16:/tmp/kubekey/kubectl DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubectl to 172.16.7.17:/tmp/kubekey/kubectl DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubectl to 172.16.7.15:/tmp/kubekey/kubectl DonePush /home/k8s-script/kubekey/v1.18.6/amd64/kubectl to 172.16.7.12:/tmp/kubekey/kubectl DonePush /home/k8s-script/kubekey/v1.18.6/amd64/helm to 172.16.7.12:/tmp/kubekey/helm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/helm to 172.16.7.16:/tmp/kubekey/helm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/helm to 172.16.7.15:/tmp/kubekey/helm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/helm to 172.16.7.17:/tmp/kubekey/helm DonePush /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.7.15:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DonePush /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.7.16:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DonePush /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.7.17:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DonePush /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.7.12:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DoneINFO[23:02:50 CST] Initializing kubernetes cluster [master 172.16.7.12] MSG:W0105 23:02:51.587457 23847 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10]W0105 23:02:51.587685 23847 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io][init] Using Kubernetes version: v1.18.6[preflight] Running pre-flight checks[preflight] Pulling images required for setting up a Kubernetes cluster[preflight] This might take a minute or two, depending on the speed of your internet connection[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"[kubelet-start] Starting the kubelet[certs] Using certificateDir folder "/etc/kubernetes/pki"[certs] Generating "ca" certificate and key[certs] Generating "apiserver" certificate and key[certs] apiserver serving cert is signed for DNS names [master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local lb.kubesphere.local kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local localhost lb.kubesphere.local master master.cluster.local node3 node3.cluster.local node4 node4.cluster.local node5 node5.cluster.local] and IPs [10.233.0.1 172.16.7.12 127.0.0.1 172.16.7.12 172.16.7.16 172.16.7.17 172.16.7.15 10.233.0.1][certs] Generating "apiserver-kubelet-client" certificate and key[certs] Generating "front-proxy-ca" certificate and key[certs] Generating "front-proxy-client" certificate and key[certs] External etcd mode: Skipping etcd/ca certificate authority generation[certs] External etcd mode: Skipping etcd/server certificate generation[certs] External etcd mode: Skipping etcd/peer certificate generation[certs] External etcd mode: Skipping etcd/healthcheck-client certificate generation[certs] External etcd mode: Skipping apiserver-etcd-client certificate generation[certs] Generating "sa" key and public key[kubeconfig] Using kubeconfig folder "/etc/kubernetes"[kubeconfig] Writing "admin.conf" kubeconfig file[kubeconfig] Writing "kubelet.conf" kubeconfig file[kubeconfig] Writing "controller-manager.conf" kubeconfig file[kubeconfig] Writing "scheduler.conf" kubeconfig file[control-plane] Using manifest folder "/etc/kubernetes/manifests"[control-plane] Creating static Pod manifest for "kube-apiserver"W0105 23:03:00.466175 23847 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"[control-plane] Creating static Pod manifest for "kube-controller-manager"W0105 23:03:00.474746 23847 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"[control-plane] Creating static Pod manifest for "kube-scheduler"W0105 23:03:00.476002 23847 manifests.go:225] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s[apiclient] All control plane components are healthy after 32.002873 seconds[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace[kubelet] Creating a ConfigMap "kubelet-config-1.18" in namespace kube-system with the configuration for the kubelets in the cluster[upload-certs] Skipping phase. Please see --upload-certs[mark-control-plane] Marking the node master as control-plane by adding the label "node-role.kubernetes.io/master=''"[mark-control-plane] Marking the node master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule][bootstrap-token] Using token: 6zsarg.gxg5eijglkupq85j[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key[addons] Applied essential addon: CoreDNS[addons] Applied essential addon: kube-proxyYour Kubernetes control-plane has initialized successfully!To start using your cluster, you need to run the following as a regular user:mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/configYou should now deploy a pod network to the cluster.Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:https://kubernetes.io/docs/concepts/cluster-administration/addons/You can now join any number of control-plane nodes by copying certificate authoritiesand service account keys on each node and then running the following as root:kubeadm join lb.kubesphere.local:6443 --token 6zsarg.gxg5eijglkupq85j \--discovery-token-ca-cert-hash sha256:8e1405a3da9e80413ab9aec1952a8259490cb174dcc74ecb96c0c5eafa429fd9 \--control-plane Then you can join any number of worker nodes by running the following on each as root:kubeadm join lb.kubesphere.local:6443 --token 6zsarg.gxg5eijglkupq85j \--discovery-token-ca-cert-hash sha256:8e1405a3da9e80413ab9aec1952a8259490cb174dcc74ecb96c0c5eafa429fd9[master 172.16.7.12] MSG:service "kube-dns" deleted[master 172.16.7.12] MSG:service/coredns created[master 172.16.7.12] MSG:serviceaccount/nodelocaldns createddaemonset.apps/nodelocaldns created[master 172.16.7.12] MSG:configmap/nodelocaldns created[master 172.16.7.12] MSG:I0105 23:04:05.247536 26174 version.go:252] remote version is much newer: v1.20.1; falling back to: stable-1.18W0105 23:04:06.468801 26174 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io][upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace[upload-certs] Using certificate key:13a993ef56fb292d7ecb9947a3095a0eca6c419dfa148569699c474a8d6c28df[master 172.16.7.12] MSG:secret/kubeadm-certs patched[master 172.16.7.12] MSG:secret/kubeadm-certs patched[master 172.16.7.12] MSG:secret/kubeadm-certs patched[master 172.16.7.12] MSG:W0105 23:04:08.563212 26292 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io]kubeadm join lb.kubesphere.local:6443 --token cfoibt.jdyzk3oc1aze53ri --discovery-token-ca-cert-hash sha256:8e1405a3da9e80413ab9aec1952a8259490cb174dcc74ecb96c0c5eafa429fd9[master 172.16.7.12] MSG:NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIMEmaster NotReady master 39s v1.18.6 172.16.7.12  CentOS Linux 7 (Core) 3.10.0-1160.11.1.el7.x86_64 docker://19.3.9INFO[23:04:09 CST] Deploying network plugin ... [master 172.16.7.12] MSG:configmap/calico-config createdcustomresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org createdcustomresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org createdclusterrole.rbac.authorization.k8s.io/calico-kube-controllers createdclusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers createdclusterrole.rbac.authorization.k8s.io/calico-node createdclusterrolebinding.rbac.authorization.k8s.io/calico-node createddaemonset.apps/calico-node createdserviceaccount/calico-node createddeployment.apps/calico-kube-controllers createdserviceaccount/calico-kube-controllers createdINFO[23:04:13 CST] Joining nodes to cluster [node5 172.16.7.15] MSG:W0105 23:04:14.035833 52825 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.[preflight] Running pre-flight checks[preflight] Reading configuration from the cluster...[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'W0105 23:04:20.030576 52825 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10][kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"[kubelet-start] Starting the kubelet[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...This node has joined the cluster:* Certificate signing request was sent to apiserver and a response was received.* The Kubelet was informed of the new secure connection details.Run 'kubectl get nodes' on the control-plane to see this node join the cluster.[node4 172.16.7.17] MSG:W0105 23:04:14.432448 53936 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.[preflight] Running pre-flight checks[preflight] Reading configuration from the cluster...[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'W0105 23:04:19.870838 53936 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10][kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"[kubelet-start] Starting the kubelet[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...This node has joined the cluster:* Certificate signing request was sent to apiserver and a response was received.* The Kubelet was informed of the new secure connection details.Run 'kubectl get nodes' on the control-plane to see this node join the cluster.[node3 172.16.7.16] MSG:W0105 23:04:14.376894 57091 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.[preflight] Running pre-flight checks[preflight] Reading configuration from the cluster...[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'W0105 23:04:20.949568 57091 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10][kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"[kubelet-start] Starting the kubelet[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...This node has joined the cluster:* Certificate signing request was sent to apiserver and a response was received.* The Kubelet was informed of the new secure connection details.Run 'kubectl get nodes' on the control-plane to see this node join the cluster.[node3 172.16.7.16] MSG:node/node3 labeled[node5 172.16.7.15] MSG:node/node5 labeled[node4 172.16.7.17] MSG:node/node4 labeled[master 172.16.7.12] MSG:storageclass.storage.k8s.io/local createdserviceaccount/openebs-maya-operator createdclusterrole.rbac.authorization.k8s.io/openebs-maya-operator createdclusterrolebinding.rbac.authorization.k8s.io/openebs-maya-operator createdconfigmap/openebs-ndm-config createddaemonset.apps/openebs-ndm createddeployment.apps/openebs-ndm-operator createddeployment.apps/openebs-localpv-provisioner createdINFO[23:04:51 CST] Deploying KubeSphere ... v3.0.0[master 172.16.7.12] MSG:namespace/kubesphere-system creatednamespace/kubesphere-monitoring-system created[master 172.16.7.12] MSG:secret/kube-etcd-client-certs created[master 172.16.7.12] MSG:namespace/kubesphere-system unchangedserviceaccount/ks-installer unchangedcustomresourcedefinition.apiextensions.k8s.io/clusterconfigurations.installer.kubesphere.io unchangedclusterrole.rbac.authorization.k8s.io/ks-installer unchangedclusterrolebinding.rbac.authorization.k8s.io/ks-installer unchangeddeployment.apps/ks-installer unchangedclusterconfiguration.installer.kubesphere.io/ks-installer createdINFO[23:10:23 CST] Installation is complete.Please check the result using the command:kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l app=ks-install -o jsonpath='{.items[0].metadata.name}') -f
遇到问题及解决方案 
 
Push /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.8.35:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DonePush /home/k8s-script/kubekey/v1.18.6/amd64/cni-plugins-linux-amd64-v0.8.6.tgz to 172.16.8.36:/tmp/kubekey/cni-plugins-linux-amd64-v0.8.6.tgz DoneINFO[16:20:31 CST] Initializing kubernetes cluster [master 172.16.8.36] MSG:[preflight] Running pre-flight checksW0105 16:20:38.445541 19396 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory[reset] No etcd config found. Assuming external etcd[reset] Please, manually reset etcd to prevent further issues[reset] Stopping the kubelet service[reset] Unmounting mounted directories in "/var/lib/kubelet"W0105 16:20:38.453323 19396 cleanupnode.go:99] [reset] Failed to evaluate the "/var/lib/kubelet" directory. Skipping its unmount and cleanup: lstat /var/lib/kubelet: no such file or directory[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki][reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf][reset] Deleting contents of stateful directories: [/var/lib/dockershim /var/run/kubernetes /var/lib/cni]The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.dThe reset process does not reset or clean up iptables rules or IPVS tables.If you wish to reset iptables, you must do so manually by using the "iptables" command.If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)to reset your system's IPVS tables.The reset process does not clean your kubeconfig files and you must remove them manually.Please, check the contents of the $HOME/.kube/config file.[master 172.16.8.36] MSG:[preflight] Running pre-flight checksW0105 16:20:40.305612 19617 removeetcdmember.go:79] [reset] No kubeadm config, using etcd pod spec to get data directory[reset] No etcd config found. Assuming external etcd[reset] Please, manually reset etcd to prevent further issues[reset] Stopping the kubelet service[reset] Unmounting mounted directories in "/var/lib/kubelet"W0105 16:20:40.310273 19617 cleanupnode.go:99] [reset] Failed to evaluate the "/var/lib/kubelet" directory. Skipping its unmount and cleanup: lstat /var/lib/kubelet: no such file or directory[reset] Deleting contents of config directories: [/etc/kubernetes/manifests /etc/kubernetes/pki][reset] Deleting files: [/etc/kubernetes/admin.conf /etc/kubernetes/kubelet.conf /etc/kubernetes/bootstrap-kubelet.conf /etc/kubernetes/controller-manager.conf /etc/kubernetes/scheduler.conf][reset] Deleting contents of stateful directories: [/var/lib/dockershim /var/run/kubernetes /var/lib/cni]The reset process does not clean CNI configuration. To do so, you must remove /etc/cni/net.dThe reset process does not reset or clean up iptables rules or IPVS tables.If you wish to reset iptables, you must do so manually by using the "iptables" command.If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar)to reset your system's IPVS tables.The reset process does not clean your kubeconfig files and you must remove them manually.Please, check the contents of the $HOME/.kube/config file.ERRO[16:20:41 CST] Failed to init kubernetes cluster: Failed to exec command: sudo -E /bin/sh -c "/usr/local/bin/kubeadm init --config=/etc/kubernetes/kubeadm-config.yaml" W0105 16:20:40.826437 19657 utils.go:26] The recommended value for "clusterDNS" in "KubeletConfiguration" is: [10.233.0.10]; the provided value is: [169.254.25.10]W0105 16:20:40.826682 19657 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io][init] Using Kubernetes version: v1.18.6[preflight] Running pre-flight checkserror execution phase preflight: [preflight] Some fatal errors occurred:[ERROR ExternalEtcdVersion]: couldn't load external etcd's certificate and key pair /etc/ssl/etcd/ssl/node-node3.pem, /etc/ssl/etcd/ssl/node-node3-key.pem: open /etc/ssl/etcd/ssl/node-node3.pem: no such file or directory[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3.pem doesn't exist[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3-key.pem doesn't exist[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`To see the stack trace of this error execute with --v=5 or higher: Process exited with status 1 node=172.16.8.36WARN[16:20:41 CST] Task failed ... WARN[16:20:41 CST] error: interrupted by error Error: Failed to init kubernetes cluster: interrupted by errorUsage:kk create cluster [flags]Flags:-f, --filename string Path to a configuration file-h, --help help for cluster--skip-pull-images Skip pre pull images--with-kubernetes string Specify a supported version of kubernetes--with-kubesphere Deploy a specific version of kubesphere (default v3.0.0)-y, --yes Skip pre-check of the installationGlobal Flags:--debug Print detailed information (default true)Failed to init kubernetes cluster: interrupted by error

在master节点执行

 sudo -E /bin/sh -c "/usr/local/bin/kubeadm init --config=/etc/kubernetes/kubeadm-config.yaml"

提取关键错误

 
[ERROR ExternalEtcdVersion]: couldn't load external etcd's certificate and key pair /etc/ssl/etcd/ssl/node-node3.pem, /etc/ssl/etcd/ssl/node-node3-key.pem: open /etc/ssl/etcd/ssl/node-node3.pem: no such file or directory[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3.pem doesn't exist[ERROR ExternalEtcdClientCertificates]: /etc/ssl/etcd/ssl/node-node3-key.pem doesn't exist

在master节点执行，再次查看

 
[root@master ~]# ls -lh /etc/ssl/etcd/ssl/总用量 32K-rw-r--r--. 1 root root 1.7K 1月 5 19:59 admin-node3-key.pem-rw-r--r--. 1 root root 1.4K 1月 5 19:59 admin-node3.pem-rw-r--r--. 1 root root 1.7K 1月 5 19:59 ca-key.pem-rw-r--r--. 1 root root 1.1K 1月 5 19:59 ca.pem-rw-r--r--. 1 root root 1.7K 1月 5 19:59 member-node3-key.pem-rw-r--r--. 1 root root 1.4K 1月 5 19:59 member-node3.pem-rw-r--r--. 1 root root 1.7K 1月 5 19:59 node-master-key.pem-rw-r--r--. 1 root root 1.4K 1月 5 19:59 node-master.pem

原来在/etc/ssl/etcd/ssl/中真不存在node-node3-key.pem、node-node3.pem，真么办？原来是我选择的是member模式。

解决方法

 
[root@master ~]# cp /etc/ssl/etcd/ssl/member-node3-key.pem /etc/ssl/etcd/ssl/node-node3-key.pem[root@master ~]# cp /etc/ssl/etcd/ssl/member-node3.pem /etc/ssl/etcd/ssl/node-node3.pem

再次执行

 
export KKZONE=cn./kk create cluster -f ./k8s-config.yaml

查看安装KubeSphere日志：

kubectl logs -n kubesphere-system $(kubectl get pod -n kubesphere-system -l app=ks-install -o jsonpath='{.items[0].metadata.name}') -f

成功安装KubeSphere3.0

登陆kubesphere 
 
#ip:30880#用户名：admin#默认密码：P@88w0rd
优秀参考
  • https://www.cnblogs.com/elfcafe/p/13779619.html
  • https://www.cnblogs.com/carriezhangyan/p/11551192.html
  • https://www.cnblogs.com/xiao987334176/p/13267339.html
  • https://www.cnblogs.com/wenyang321/p/14086162.html
  • https://www.cnblogs.com/technology178/p/13547342.html
  • https://www.cnblogs.com/wuchangblog/p/14091717.html
  • https://www.cnblogs.com/it-peng/p/11393812.html

推荐这个博文：https://blog.csdn.net/weixin_43141746/article/details/110261158