树莓派基础设置
树莓派修改键盘布局
1
sudo dpkg-reconfigure keyboard-configuration
选通用的101键PC键盘
在键盘layout选择中,选Other
然后在选项中,选English(US)
再选English(US, alternative international)
一直下一步,最后重启
1
sudo reboot
树莓派修改启动进入终端界面
1
2
3
4
sudo raspi-config
boot option ->console
树莓派开启ssh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
sudo raspi-config
Select Interfacing Options
Navigate to and select SSH
Choose Yes
Select Ok
Choose Finish
sudo systemctl enable ssh
sudo systemctl start ssh
编译golang为arm可执行程序
1
GOOS=linux GOARCH=arm GOARM=6 go build -v
GOARM=5: use software floating point; when CPU doesn’t have VFP co-processor
GOARM=6: use VFPv1 only; default if cross compiling; usually ARM11 or better cores (VFPv2 or better is also supported)
GOARM=7: use VFPv3; usually Cortex-A cores
编译arm可执行程序
包管理
解决下载软件包连接不上的问题 connect to mirrors.opencas.cn….
1
2
3
4
5
6
7
sudo vim /etc/apt/sources.list
替换源为
deb http://mirrors.shu.edu.cn/raspbian/raspbian/ stretch main contrib non-free rpi
sudo apt-get update&& sudo apt-get -y dist-upgrade&&sudo apt-get update